One Material, One Mood: Solid Pine Floors and a Matching Kitchen (Matsugasaki, Part 7)
Location: Matsugasaki, Kyoto | Work: Solid pine flooring and kitchen installation | Series: Matsugasaki Machiya Renovation, Part 7
1. The Idea: Keep It to One Wood
Once the floor structure was rebuilt (Part 6), it was time to choose the finishes for the ground floor. Rather than mixing a flooring brand with a kitchen brand and hoping the colors would match, we used a single Japanese manufacturer, WOODONE, for both: solid pine flooring throughout, and a kitchen faced in the same pine.
Pine is a pale, soft-grained wood that ages to a warm honey tone. In a machiya, where the original structure is dark timber and the rooms are not large, a light floor and light kitchen open the space up without fighting the old beams and posts.
2. From Frame to Floor
The photos below show how far this room traveled. First, the new floor beams and joists going in over the old ground, with the kitchen area at the back still stripped to concrete and tile. Then the room boarded out, walls and ceiling closed, with the floor protected under cardboard while the carpenters finished. And finally the room as the owner now lives in it.
[IMAGE 1: The ground floor during structural work, new joists laid and the old kitchen corner stripped bare]

[IMAGE 2: Walls and ceiling boarded, floor protected, finishing work under way]

3. Solid Wood, Not Laminate
This is solid pine (muku-zai in Japanese), not a printed laminate. Each board is a single piece of wood, so it can be sanded and refinished over the years instead of replaced, and it feels warmer underfoot in winter than laminate or tile. It will mark and mellow with use, which most owners of old houses consider part of the appeal.
4. The Kitchen
The kitchen replaced the old one that was removed to make room for the bathroom (Part 3). Its drawer and door fronts are the same pine as the floor, with a plain grey worktop and stainless hood so that nothing competes with the wood. Instead of a kitchen that looks like an appliance dropped into a traditional room, it reads as furniture made of the same material as the house. Against white painted walls, the afternoon light does the rest.
[IMAGE 3: The finished kitchen and floor in afternoon light]

5. Why We Suggest This Approach
Owners renovating from overseas often choose finishes from catalogues, one item at a time. Keeping the floor and kitchen to one manufacturer and one wood removes the guesswork: the colors match by design, and the result feels calm rather than busy. It is also simpler for us to order and schedule, which keeps the project on time.
FAQ
Is pine durable enough for a floor?
Pine is softer than oak, so it will show dents from dropped objects and furniture over time. For most owners this is acceptable and even welcome; if you want a floor that stays perfectly flat and unmarked, a harder wood is the better choice.
How is a solid wood floor maintained?
Regular sweeping and occasional light oiling. It should not be left wet. Every ten years or so it can be sanded and re-oiled to look new again.
More From This Renovation
Read the full story of this project, with links to every stage, in Renovating a Machiya in Matsugasaki, Kyoto: The Full Story. Choosing finishes for an older Kyoto house? Contact Tsuji House.


